|
Name of the project
|
Year |
Industry |
| Execution of CFD simulation of server room ventilation |
2025 |
Data science |
| Design of modifications to the static mixer housing |
2024 |
Cosmetics |
| Simulation of hydrogen sulfide separation from pyrolysis gas through condensation |
2024 |
Energy |
| Design of a heat recovery installation in a waste incineration plant |
2024 |
Energy |
| Engineering support in verifying the correctness of the CIP washing system design for the dough production line |
2024 |
Food |
| Detailed design of blender heating installation |
2024 |
Chemical |
| Support in designing heating and cooling nodes for equipment on the grease production line |
2024 |
Chemical |
| Detailed design of a chilled water skid in the ammonia plant room |
2024 |
Chemical |
| Engineering supervision of integration of the installation into the existing nitric acid system |
2024 |
Chemical |
| As-built documentation of LPG and pyro gas pipelines |
2024 |
Chemical |
| Preparation of simulations and P&ID diagrams for the distillation unit |
2024 |
Chemical |
| Development of technical-operational documentation for the process water system |
2024 |
Food |
| Support in designing a lactic acid production installation via fermentation |
2024 |
Food |
| Additional work on the architectural, construction, and technical design of the potassium phosphate production plant |
2024 |
Chemical |
| Preparation of drawings and update of documentation for the flotation system (System I) at the Central Wastewater Treatment Plant at PKN ORLEN S.A. in Płock |
2024 |
Petrochemical |
| Site Development Plan, Architectural-Construction Design, Technical Design, and Process Design of a potassium phosphate production installation |
2023 |
Chemical |
| Detailed design of a pilot plant installation for testing fiber production from oat husks |
2023 |
Food |
| Preparation of a feasibility study for the implementation of a methanol production plant with a capacity of 1,000 tons per year, including design assumptions for 4,000 and 84,000 tons/year plants, and calculations/design for scale-up of the methanol synthesis reactor |
2023 |
Chemical |
| Definition of operating parameters and geometric conditions of bioreactors, considering process kinetics for the conceptual design of a lactic acid production plant via fermentation, based on provided cultivation data |
2023 |
Biotechnology |
| Support in designing a lactic acid production installation via fermentation |
2023 |
Biotechnology |
| Supervision of the sanitization of the demineralized water station and water loops at CETES Cosmetics Poland Sp. z o.o. |
2023 |
Cosmetics |
| Silver content determination in wastewater samples |
2023 |
Chemical |
| Preparation of drawings and update of documentation for the flotation system (System I) at the Central Wastewater Treatment Plant at PKN ORLEN S.A. in Płock |
2023 |
Petrochemical |
| Preparation of P&ID diagrams for the PAC installation based on existing documentation and revision of the biological system documentation |
2023 |
Chemical |
| Consulting and project support for methanol production installation |
2023 |
Chemical |
| TGA and DSC analysis of ion-exchange resin samples activated and rinsed with analytical grade glycerin |
2023 |
Chemical |
| Relocation and rearrangement of the experimental methanol production installation |
2023 |
Chemical |
| TGA and DSC analysis of ion-exchange resin samples and technical-grade glycerin |
2023 |
Chemical |
| Technical expertise regarding the failure of an adsorption column at ORLEN Południe S.A. in Trzebinia |
2023 |
Chemical |
| Viscosity curve determination of glycerin samples |
2023 |
Chemical |
| Design of a heat recovery unit for Nestlé PURINA PetCare |
2023 |
Pet food |
| Technical consulting on the implementation of a magnetic filter for pharmaceutical industry applications |
2023 |
Pharmaceutical |
| Design of compressed air connections for SYSTEM II in the olefin plant expansion project at PKN Orlen in Płock |
2023 |
Pharmaceutical |
| (Repeated) Design of compressed air connections for SYSTEM II in the olefin plant expansion project at PKN Orlen in Płock |
2023 |
Chemical |
| Verification and correction of a grant application for the construction of a potassium phosphate production unit |
2023 |
Chemical |
| Approval of revised documentation for laboratory and office space reconstruction at CETES Cosmetics Poland Sp. z o.o. |
2023 |
Cosmetics |
| Verification of documentation consistency for BATTERY LIMIT AND INTERFACE POINT LIST OF PIPING FOR SYSTEM II in the olefin plant expansion project at PKN Orlen in Płock |
2023 |
Petrochemical |
| Preparation of documentation for the registration of a container for fire-hazardous materials, including risk analysis, for CETES Cosmetics Poland Sp. z o.o. |
2023 |
Cosmetics |
| Name of the project |
Year |
Industry |
| Explosion hazard assessment for a cellulose-based compounding system |
2023 |
Food |
| Technical expertise including inventory of the device and design for the upgrade of the SBSB bioreactor |
2023 |
Biotechnology |
| Numerical analysis of the salt flow in the pyrolytic reactor shell |
2023 |
Chemical |
| Workshop design of the support structure of the damaged ceilings in the reconstruction area of the laboratories and office part of cosmetics facilities |
2023 |
Cosmetic |
| Detailed design of the molten salt piping system |
2023 |
Chemical |
| Inventory of the evaporator unit |
2023 |
Chemical |
| Engineering supervision of the construction of sanitary and technological systems in the area of laboratory reconstruction and office part of cosmetics facilities |
2023 |
Cosmetic |
| Determination of viscosity curves of impure technical glycerine samples |
2023 |
Chemical |
| Workshop design of a steel construction for the production of functional cellulose blends |
2023 |
Food |
| Detailed design for reconstruction of laboratories and office part of cosmetics facilities |
2022 |
Cosmetic |
| Detailed design of a tyre pyrolysis system |
2022 |
Chemical |
| Conceptual design of an installation for the production of functional cellulose blends |
2022 |
Food |
| Preparation of documents for a replacement construction permit for a tomato processing line building project |
2022 |
Food |
| Preparation of P&ID diagrams based on existing designs for mechanical wastewater treatment plant and biological treatment plant |
2022 |
Chemical |
| Preparation of a cost estimate on the basis of a preliminary budget for the project of a tomato processing line building |
2022 |
Food |
| Technical design of the hydraulic mist condenser support structure by authorised specialists |
2022 |
Food |
| Verification of compliance of the device for catalytic afterburning of hydrocarbons with the currently applicable requirements of the European Union directives |
2022 |
Chemical |
| Detailed design of the hydraulic mist condenser system |
2022 |
Food |
| Execution of technical structural designs for concrete underground tanks and truck ramps for tomato processing facilities |
2022 |
Food |
| Conceptual design update for food flavour production facilities |
2022 |
Food |
| Preparation of input for environmental decision for potassium phosphate facilities |
2022 |
Food |
| Development of a detailed design for the system of utilities in a cosmetics facilities washing station |
2022 |
Cosmetic |
| Detailed design of a system for mixing food fibre with additives |
2022 |
Food |
| Detailed design of a fire alarm system for the construction project of a new hall for the implementation of a tomato processing line |
2022 |
Food |
| Development of a detailed design for the extension of a compressor station at a food facility |
2022 |
Food |
| Development of a conceptual design for the construction of a technological system for the production of Beta Glucan |
2022 |
Cosmetic |
| Preparation of a detailed design for a pilot system for adipic acid production |
2022 |
Chemical |
| Tomato processing facility utility flyover |
2022 |
Food |
| As-built documentation for a separator system to treat wastewater from sludge and mechanical impurities and to remove suspended solids and oil from the stream |
2021 |
Chemical |
| Preparation of as-built documentation of TWS pipelines in power plants |
2021 |
Energy sector |
| Offer for supervision of the sanitisation of a demineralised water station and a process water loop |
2021 |
Cosmetic |
| Conceptual design of a system for the production of technical carboxymethyl cellulose (CMC) |
2021 |
Chemical |
| Conceptual design of a system for the production of technical carboxymethyl starch (CMS) |
2021 |
Chemical |
| Construction project for electrical systems of a transformer and distribution station |
2021 |
Food |
| Design of a compressor room in a newly designed tomato processing line hall |
2021 |
Food |
| Calculation of supply and return pipelines for heating water for a belt dryer |
2021 |
Chemical |
| Supervision of the installation of pipeline burns including design of pH sensor connections |
2021 |
Energy sector |
| Design of the demolition of 3 buildings and construction design of a new hall for the implementation of a tomato processing production line |
2021 |
Food |
| Design of an ultra-pure process water system |
2021 |
Food |
| Development of a basic process design for a tomato processing line based on the investor's existing technology |
2021 |
Food |
| Detailed design of a tank and construction for an oil wastewater separator |
2021 |
Chemical |
| Development of a pressure drop calculator for non-Newtonian fluids in MS Excel environment |
2021 |
- |
| Compressed air system design |
2021 |
Food |
| Development of cooling systems for human plasma storage rooms |
2021 |
Pharmaceutical |
| Development of process diagrams for a pharmaceutical mixer |
2021 |
Pharmaceutical |
| Detailed design of the heating system for the aluminium pickling bath |
2021 |
Metallurgical |
| Supervision of the extension of the measurement apparatus of the wet flue gas desulphurisation system in a power plant |
2021 |
Energy sector |
| Design and supervision of construction and commissioning |
| tyre pyrolysis system |
2021 |
Chemical |
| Completion of the detailed design of the separator system for treatment of wastewater from sludge and mechanical impurities and removal of suspended solids and oil from the stream |
2021 |
Chemical |
| Development of an architectural concept for a potassium phosphate facility |
2021 |
Food |
| Detailed design of the filtering and cooling system for the pyrolysis oil |
2021 |
Chemical |
| Design of a compressed air and demineralised water system |
2021 |
Food |
| Conceptual design for a food-grade potassium phosphate production unit |
2021 |
Food |
| Supervision of the sanitisation of the demineralised water station and the water loop |
2020 |
Cosmetic |
| Conceptual design of a 2000 kg/h afterburner for pyrolysis soot |
2020 |
Chemical |
| Detailed design of the skid of the pyrolysis oil recirculation system |
2020 |
Chemical |
| Detailed design of intermediate pyrolysis soot buffer with a hopper |
2020 |
Chemical |
| Conceptual design of a system for production of food flavours |
2020 |
Food |
| Preparation of a technological description of an innovative production of greaves |
2020 |
Food |
| Preparation of a conceptual design of a pellet transport system |
2020 |
Chemical |
| Determination of the flow curve of sourdough |
2020 |
Food |
| Conceptual design of an installation for the production of API - Active Pharmaceutical Ingredients from raw materials of animal origin |
2020 |
Pharmaceutical |
| Detailed design of a compressed air system for the logistic-production centre of a malt blending facility |
2020 |
Food |
| Supervision over implementation of a disinfectant production line |
2020 |
Cosmetic |
| Detailed engineering design of a compressed air cooling system for bottle blowing |
2020 |
Chemical |
| Execution of a conceptual design for a system to produce fibre from oat hulls |
2020 |
Food |
| Execution of a conceptual design for the foundation of an ethanol tank with a capacity of 50 m3 |
2020 |
Chemical |
| Design of a production line for disinfectants |
2020 |
Cosmetic |
| Chemical safety assessment for a disinfectant production line |
2020 |
Cosmetic |
| Conceptual design of a rapeseed cake extractor |
2020 |
Food |
| Conceptual design of a system for the cultivation of saltwater microalgae |
2020 |
Biotechnology |
